一起发物流（深圳）有限公司
全部分类
全部分类
英
  1. 首页
  2. 插头和插座
  3. 1/2/3Gang Smart Wireless Switch Wifi RF 433 Mhz 86 Portable White/Gray Home Wall Panel Buttons Remote Control Light Module Receiver
1/2/3Gang Smart Wireless Switch Wifi RF 433 Mhz 86 Portable White/Gray Home Wall Panel Buttons Remote Control Light Module Receiver

1/2/3Gang Smart Wireless Switch Wifi RF 433 Mhz 86 Portable White/Gray Home Wall Panel Buttons Remote Control Light Module Receiver

1/2/3Gang Smart Wireless Switch Wifi RF 433 Mhz 86 Portable White/Gray Home Wall Panel Buttons Remote Control Light Module Receiver

您尚未登录，登录后即可查看商品价格。

仓库类型：自建仓

服务说明： 批发 圈商 包邮

物流周期： 8天内送达 7天内送达 9天内送达 12小时揽收 24小时揽收 homeroots

可选规格
首页

注意注意

关闭

平台部分商品含有相关成分元素，请各位分销商需提前了解产品材质情况，并针对其做好相关的风险把控，以免造成不必要的损失。

*美国加州65法案进一步规定了对于仅包含致癌物质，仅包含致生殖毒性物质，同时包含致癌物质和致生殖毒性物质，亦或是包含某一物质即为致癌物质又为致生殖毒性物质的产品的警示标语要求。

*新法案提供的警示标语修订并不是强制实施的，其只是避免昂贵诉讼的一种有效的方法。只要企业在保证其使用的另外的警示标语是“清晰和合理”并符合加州65法案要求的，那也是可以被接受的。
*请充分了解第三方销售平台对商品上架规要求，并根据对应平台规则调整相关商品信息后进行上架，以免造成您不必要损失。

看了又看

  • Connectivity Technology: Wi-fi
  • Recommended Uses For Product: For smartphones or tablets
  • Special Features: Shock-resistant
  • Wireless Communication Technology: Radio Frequency
  • Water Resistance Level: Non - Waterproof
  • Mounting Type: Wall mount
  • Controller Type: Remote Control
  • Power Mode: Battery Powered
  • Operating Voltage: ≤36V
  • Brand: wenzhi
  • Battery Properties: Without Battery

Wenzhi Wieless RF433 Mhz receiver & wall panel transmitter

Input Voltage : AC 90-250V Max Current : 10A Maximum load power: resistive power 2200W Induction power 500W Capacitive power 200W Incandescent lamp 2200W LED light 300W Energy-saving lamp 300W The number of lights that can be controlled at the same time: less than 6 lights, and thelight strip is less than 6 meters Operating Frequency: 433MHz Dimensions: 80mm*40mm Battery Model: CR2032 (Package Not included battery) Dimensions: 88mm x 90mm x 10mm Distance: 20-30 meters

NOTE 1) Do not wire with power on, turn off the power to wire, and power on after checking and confirming that it is correct. 2) When the remote control voltage is low, please replace the battery in time (when the remote control battery voltage is low, the remote control distance will generally become shorter).

3) When using wireless electronic products, pay attention to avoiding metal masks, large electronic devices,electromagnetic fields and other strong sources of interference, so as to avoid the short distance between the remote control and the receiver or the failure of normal operation. 4) Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product. In severe cases, it will damage the product and bring hidden dangers to your safety.

SET UP 1. Setting momentary Mode: Press the receiver's Learning button 1 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's button, the receiver's blue LED will flash then come off, Setting successfully.

2. Setting Toggle Mode (Common working mode): Press the receiver's Learning button 2 time, the receiver's red LED will be lights up, it comes into Setting state; Press the remote's button, the receiver's blue LED will flash then come off, Setting successfully.

Momentary mode: Press the Remote control button, the receiver's relay is ON; release button, the receiver's relay is OFF. Toggle mode: Press Remote control button for 1 time, the receiver's relay is ON; press button again, the receiver's relay is OFF. Latched mode: Press Remote control button A, the receiver's relay is ON, Press the transmitter's button B, the receiver's relay is OFF.

Reset function: After push the receiver's learning button 8 times, the receiver Clear all the remote control data in its memory.When the red LED flashes for a few times, it indicates that the clear function is completed. (After cleared the code in the receiver, all the remote control cannot work with the receiver.)

Set power on state： Press the learning button on the receiver 6 times, and the red LED flashes 3 times.Switch the power on / off state successfully.

How to access WiFi?（Wifi+RF433 version）

After the wiring is completed, turn on the power and operate according to the status of the smart switch indicator: 1) If the LED light of the smart switch flashes continuously at this time, it indicates that the smart switch has entered the state of waiting for connection to WiFi; then open the APP and follow the instructions to connect to WiFi.

2) If the indicator light of the smart switch is not flashing LED light, please press the button of the smart switch and keep it for more than 5 seconds until the LED light flashes continuously, then open the APP and connect to the WiFi according to the manual.

没有评价数据